RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-247002.png)
6. REMOVE INLET NO. 2 AIR CLEANER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
7. REMOVE INLET NO. 1 AIR CLEANER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
8. REMOVE BATTERY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
9. REMOVE AIR CLEANER BRACKET
(a) Remove the 3 bolts and air cleaner bracket.
10. REMOVE TCM
(a) Turn the lock lever and disconnect the connector from the TCM.
(b) Remove the 2 bolts and TCM from the transaxle.
From 08/2009
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: TCM: REMOVAL
NOTICE:
If automatic transmission parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional
operations are necessary See: Powertrain Management/Transmission Control Systems/Service Precautions/U660E Automatic
Transaxle System.
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
