RX 350 FWD V6-3.5L (2GR-FE) (2010)
(1) Using a screwdriver with the tip wrapped with protective tape, disconnect the airbag connector.
Text in Illustration
NOTICE:
When disconnecting the airbag connector, take care not to damage the airbag wire harness.
(f) Install SST.
CAUTION:
Check that there is no looseness in the driver side knee airbag assembly.
(1) Connect the SST connector to the driver side knee airbag assembly.
SST : 09082-00700
SST : 09082-00802
09082-10801
09082-20801
NOTICE:
To avoid damaging the SST connector or wire harness, do not lock the secondary lock of the twin lock.
(2) Move SST at least 10 m (32.8 ft.) away from the side window of the vehicle.
Text in Illustration
(3) Maintaining sufficient clearance for the SST wire harness in the front side window, close all doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4) Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-) battery terminal.