RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
SST : 09082-00700
NOTICE:
To avoid damaging the SST connector or wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for the
SST wire harness inside the tire.
(2) Move SST at least 10 m (32.8 ft.) away from the airbag tied down to the tire.
(g) Deploy the airbag.
(1) Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-) battery terminal.
(2) Check that no one is within a 10 m (32.8 ft.) radius of the tire to which the driver side knee airbag assembly is tied.
(3) Press the SST activation switch and deploy the airbag.
CAUTION:
Before deployment, make sure that no one is near the airbag.
HINT
The airbag is deployed as the LED of the SST activation switch comes on.
(h) Dispose of the driver side knee airbag assembly.
CAUTION:
*
The driver side knee airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes
after deployment.
*
Use gloves and safety glasses when handling a driver side knee airbag assembly with a deployed airbag.
*
Do not apply water etc. to a driver side knee airbag assembly with a deployed airbag.
*
Always wash your hands with water after completing the operation.
(1) Remove the driver side knee airbag assembly from the tire.
(2) Place the driver side knee airbag assembly in a plastic bag, tie it tightly, and dispose of it according to local regulations.
Up to 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Front Passenger Side): DISPOSAL
CAUTION: