RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
CAUTION:
*
Make sure that the wires are tight. If there is slack in the wires, the front passenger airbag assembly may break loose when the
airbag is deployed.
*
Always tie down the front passenger airbag assembly with the airbag deployment side facing inside the tire as shown in the
illustration.
NOTICE:
The tires may be damaged by the airbag deployment, so use an unneeded tire.
(e) Place the tires.
(1) Place at least 2 tires under the tire to which the front passenger airbag assembly is tied.
(2) Place at least 2 tires onto the tire to which the front passenger airbag assembly is tied. The top tire should have a wheel installed.
NOTICE:
Do not place the SST connector under the tire because it could be damaged.
(3) Tie the tires together with the 2 wires.
CAUTION:
Make sure that the wires are tight. Looseness in the wires results in the tires breaking loose when the airbag is deployed.
(f) Install SST.
(1) Connect the SST connector.