lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Procedures|Page 9718 > < Procedures|Page 9716
Page 42
background image

Wire:

Stripped wire section

1.25 mm2 (0.0019 in.2) or more

CAUTION:
If the wire is too thin or an alternative object is used to tie down the front passenger airbag assembly, it may snap when the airbag is
deployed. Always use a wire for vehicle use with an area of at least 1.25 mm2 (0.0019 in.2).

HINT
To calculate the area of the stripped wire section:

Area = 3.14 x (Diameter)2 / 4

(1) Position the front passenger airbag assembly inside the tire with the airbag deployment side facing inside.

Minimum tire size:

Must exceed the following dimensions

Width:

185 mm (7.28 in.)

Inner diameter:

360 mm (1.18 ft.)

Text in Illustration

CAUTION:
*

Make sure that the wires are tight. If there is slack in the wires, the front passenger airbag assembly may break loose when the
airbag is deployed.

*

Always tie down the front passenger airbag assembly with the airbag deployment side facing inside the tire as shown in the
illustration.

NOTICE:
The tires may be damaged by the airbag deployment, so use an unneeded tire.

(e) Place the tires.

Procedures|Page 9718 > < Procedures|Page 9716