RX 350 FWD V6-3.5L (2GR-FE) (2010)
SST : 09082-00700
(b) Refer to Precaution See: Service Precautions.
(c) Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(d) Disconnect the connector from the front seat side airbag assembly under the front seat assembly.
NOTICE:
When disconnecting the airbag connector, take care not to damage the airbag wire harness.
(1) Slide the slider to release the lock, and then disconnect the yellow airbag connector under the front seat assembly.
Text in Illustration
(e) Install SST.
CAUTION:
Check that there is no looseness in the front seat assembly.
(1) Connect the SST connector to the front seat side airbag assembly connector.
SST : 09082-00700
SST : 09082-00820
NOTICE:
To avoid damaging the SST connector or wire harness, do not lock the secondary lock of the twin lock.
(2) Move SST at least 10 m (32.8 ft.) away from the front side window.