RX 350 FWD V6-3.5L (2GR-FE) (2010)
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal.
5. REMOVE REAR OUTER SEAT TRACK BRACKET COVER RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal.
6. REMOVE REAR INNER SEAT TRACK BRACKET COVER RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal.
7. REMOVE FRONT SEAT ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal.
8. REMOVE OCCUPANT CLASSIFICATION ECU
(a) Disconnect the 4 connectors.
(b) Disengage the 2 claws (A) and separate the 2 connectors.
(c) Remove the 6 clamps.
(d) Disengage the claw (B) and separate the wire harness holder as shown in the illustration.
Text in Illustration
(e) Using a screwdriver with the tip wrapped with protective tape, disengage the claw to remove the occupant classification ECU.
Text in Illustration
From 08/2009