RX 350 FWD V6-3.5L (2GR-FE) (2010)
Replacement/Removal
5. REMOVE LOWER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
6. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY
(a) Remove the bolt and disconnect the floor end of the front seat outer belt assembly.
7. REMOVE CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
8. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
(a) Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.
(b) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner
connector as shown in the illustration.
HINT
Tape the screwdriver tip before use.
(c) Disconnect each connector.
(d) Remove the 2 bolts and front seat outer belt assembly.
9. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Remove the 2 bolts.
(b) Disengage the guide and remove the front shoulder belt anchor adjuster assembly.
From 08/2009