RX 350 FWD V6-3.5L (2GR-FE) (2010)
Up to 08/2009
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for RH Side): REMOVAL
1. REMOVE REAR SEAT ASSEMBLY RH
(a) Remove the rear seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for RH
Side)/Removal.
2. REMOVE REAR SEAT INNER BELT ASSEMBLY
(a) Pull the reclining adjuster release handle to recline the seatback.
(b) Remove the bolt and the rear seat inner belt assembly.
HINT
When the bolt is removed, the rear seat inner belt assembly is also removed.
From 08/2009
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for RH Side): REMOVAL
1. REMOVE REAR SEAT ASSEMBLY RH
(a) Remove the rear seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for RH
Side)/Removal.
2. REMOVE REAR SEAT INNER BELT ASSEMBLY
(a) Pull the reclining adjuster release handle to recline the seatback.
(b) Remove the bolt and the rear seat inner belt assembly.
HINT
When the bolt is removed, the rear seat inner belt assembly is also removed.
Up to 08/2009
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for RH Side): INSTALLATION
1. INSTALL REAR SEAT INNER BELT ASSEMBLY
(a) Install the rear seat inner belt assembly with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)