RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
*
Be careful not to damage the cover.
*
When installing the hog rings, avoid wrinkling the cover.
3. INSTALL FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function) See: Body and
Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly/Reassembly
4. INSTALL FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function) See: Body and
Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly/Reassembly
5. INSTALL POWER SEAT SWITCH See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly/Reassembly
6. INSTALL FRONT SEAT CUSHION INNER SHIELD See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
7. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
9. INSTALL RECLINING POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
10. INSTALL FRONT SEAT INNER BELT ASSEMBLY See: Seat Belt Systems/Seat Belt/Service and Repair/Removal and Replacement/Front
Seat Inner Belt Assembly/Installation
11. INSTALL FRONT SEAT ASSEMBLY (for Front Passenger Side)
(a) Install the front seat assembly See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly/Installation.
From 08/2009
SEAT BELT: OCCUPANT DETECTION SENSOR: INSTALLATION
1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (w/o Seat Cushion Front Edge Adjustment Function)
(a) Using hog ring pliers, install the separate type front seat cushion pad to the separate type front seat cushion cover with 19 new hog rings.
NOTICE:
*
Be careful not to damage the cover.
*
When installing the hog rings, avoid wrinkling the cover.