RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Install the power back door touch sensor assembly with the 4 screws.
Torque : 3.5 Nm (36 kgf-cm, 31 in-lbf)
(c) Connect the connector.
2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
3. INSTALL BACK DOOR SERVICE HOLE COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
4. INSTALL BACK DOOR SERVICE HOLE COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
5. INSTALL BACK DOOR UPPER TRIM COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
6. INSTALL BACK DOOR UPPER TRIM COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Installation
8. INSTALL BACK DOOR LOCK COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
9. INSTALL BACK DOOR TRIM BASE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Overhaul/Reassembly
10. INSTALL DOOR PULL HANDLE WITH SWITCH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
11. INSTALL TONNEAU COVER SUB-ASSEMBLY