RX 350 FWD V6-3.5L (2GR-FE) (2010)
Engine Temperature Sensor: Service and Repair
Installation
Up to 08/2009
2GR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Install a new gasket onto the engine coolant temperature sensor.
(b) Install the engine coolant temperature sensor and gasket.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
(c) Connect the engine coolant temperature sensor connector.
2. INSTALL AIR CLEANER ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
3. INSTALL NO. 1 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
4. INSTALL NO. 2 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
5. INSTALL BATTERY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
7. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
8. INSPECT FOR COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
9. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
10. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Installation
11. INSTALL FRONT SHOCK ABSORBER CAP (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Front Shock Absorber (w/ Air Suspension)/Installation
12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Install the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation.
13. INSTALL NO. 1 ENGINE UNDER COVER
From 08/2009