RX 350 FWD V6-3.5L (2GR-FE) (2010)
4. REMOVE LOWER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
5. REMOVE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Using a T30 "TORX" socket wrench, remove the "TORX" bolt and front door courtesy light switch assembly.
Up to 08/2009
LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the "TORX" bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
2. INSTALL LOWER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
3. INSTALL REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
5. INSTALL FRONT DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
From 08/2009
LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the "TORX" bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.