RX 350 FWD V6-3.5L (2GR-FE) (2010)
LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION
1. INSTALL STOP LIGHT SWITCH ASSEMBLY
(a) Temporarily install the stop light switch assembly with the stop light switch lock nut.
Text in Illustration
(b) Turn the stop light switch assembly so that the clearance between the nut end and stop light switch cushion is between A.
Standard Clearance
Text in Illustration
(c) Tighten the stop light switch lock nut.
Torque : 17 Nm (170 kgf-cm, 12 ft-lbf)
(d) Connect the connector.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation