RX 350 FWD V6-3.5L (2GR-FE) (2010)
Ride Height Sensor: Service and Repair
Height Control Sensor (for Front Side)
Components
SUSPENSION CONTROL: HEIGHT CONTROL SENSOR (for Front Side): COMPONENTS
Up to 08/2009
SUSPENSION CONTROL: HEIGHT CONTROL SENSOR (for Front Side): REMOVAL
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
NOTICE:
Before removal, make sure to disable vehicle height control by pressing the height control OFF switch and confirming that the height
control OFF indication is displayed on the meter.
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE FRONT WHEEL