RX 350 FWD V6-3.5L (2GR-FE) (2010)
From 08/2009
SUSPENSION CONTROL: HEIGHT CONTROL OFF SWITCH: INSTALLATION
1. INSTALL HEIGHT CONTROL OFF SWITCH
(a) Engage the 2 claws to install the height control OFF switch to the No. 1 instrument panel under cover sub-assembly.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTICE:
Some systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
5. INSPECT SUSPENSION CONTROL SYSTEM
(a) Inspect the suspension control system See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General
Diagnostics/Air Suspension System/Test Mode Procedure.