RX 350 FWD V6-3.5L (2GR-FE) (2010)
Suspension Mode Switch: Service and Repair
Height Control Switch (for Luggage Compartment)
Components
SUSPENSION CONTROL: HEIGHT CONTROL SWITCH (for Luggage Compartment): COMPONENTS
Up to 08/2009
SUSPENSION CONTROL: HEIGHT CONTROL SWITCH (for Luggage Compartment): REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE HEIGHT CONTROL SWITCH
(a) Disengage the 2 claws to remove the height control switch from the deck trim side panel assembly RH.
(b) Disconnect the connector.
From 08/2009
SUSPENSION CONTROL: HEIGHT CONTROL SWITCH (for Luggage Compartment): REMOVAL