RX 350 FWD V6-3.5L (2GR-FE) (2010)
Tire Pressure Sensor: Removal and Replacement
Components
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING VALVE: COMPONENTS
Up to 08/2009
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING VALVE: REMOVAL
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. REMOVE FRONT WHEEL
3. REMOVE REAR WHEEL
4. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER
(a) Remove the valve core and cap to release the air from the tire.
(b) After ensuring that a sufficient amount of air has been released, remove the nut and washer used to secure the tire pressure warning valve and
transmitter. Drop the tire pressure warning valve and transmitter into the tire.
HINT
Keep the removed cap and valve core.
(c) After dropping the tire pressure warning valve and transmitter into the tire, disengage the bead using the shoe of a tire remover.