RX 350 FWD V6-3.5L (2GR-FE) (2010)
Wiper Switch: Service and Repair
Installation
Up to 08/2009
WIPER / WASHER: WIPER SWITCH: INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Engage the claw and install the windshield wiper switch assembly as shown in the illustration.
(b) Connect the connector.
2. INSTALL STEERING COLUMN COVER (for TMC Made)
(a) Engage the 2 guides and the 4 clips as shown in the illustration.
(b) Engage the claw.
(c) Engage the 2 claws to install the steering column cover.
NOTICE:
Do not damage the tilt and telescopic switch.
(d) Install the screw.
(e) Turn the steering wheel assembly to the left and install the screw as shown in the illustration.