RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-1854001.png)
Alternator: Removal and Replacement
Replacement
2GR-FE BATTERY / CHARGING: GENERATOR: REPLACEMENT
1. REPLACE GENERATOR DRIVE END FRAME BEARING
(a) Remove the 4 screws and retainer plate from the drive end frame.
(b) Using SST and a hammer, tap out the drive end frame bearing from the drive end frame.
SST : 09950-60010
09951-00250
SST : 09950-70010
09951-07100
(c) Using SST and a press, press in a new generator drive end frame bearing.
SST : 09950-60010
09951-00470
SST : 09950-70010
09951-07100
(d) Fit the tabs on the retainer plate into the cutouts on the drive end frame to install the retainer plate.
