RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(e) Fit SST (B) to the clutch pulley.
Text in Illustration
(f) Loosen the pulley by turning SST (B) in the direction shown in the illustration.
NOTICE:
*
Check that the drive end frame is secured in the vise tightly.
*
Hold SST (A) tightly during the operation.
Text in Illustration
(g) Remove the generator assembly from SST.
(h) Remove the clutch pulley from the rotor shaft.
6. REMOVE GENERATOR ROTOR ASSEMBLY