RX 350 FWD V6-3.5L (2GR-FE) (2010)
From 08/2009
POWER OUTLETS (INT): POWER OUTLET SOCKET: REMOVAL
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
3. REMOVE NO. 2 CONSOLE BOX DUCT See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Removal
4. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Removal
5. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) See: Accessories and Optional Equipment/Entertainment
Systems/Entertainment System Control Module/Service and Repair/Multi-Media Interface ECU/Removal
6. REMOVE REAR CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Removal
7. REMOVE LOWER CONSOLE BOX POCKET See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhaul/Disassembly
8. REMOVE CONSOLE COIN BOX See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhaul/Disassembly
9. REMOVE FRONT CONSOLE UPPER PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhaul/Disassembly
10. REMOVE STEREO JACK ADAPTER ASSEMBLY See: Accessories and Optional Equipment/Entertainment Systems/Auxiliary Input / Output
Jack/Service and Repair/Removal
11. REMOVE POWER POINT SOCKET ASSEMBLY
(a) Disconnect each connector.
(b) Disengage the 2 clamps.
(c) Using a screwdriver, bend back and break off the 4 claws as shown in the illustration.
HINT
The power point socket cover will not be reused.