RX 350 FWD V6-3.5L (2GR-FE) (2010)
(c) Disconnect the connectors from the back of the instrument panel junction block assembly.
5. REMOVE AFS ECU
HINT
Refer to the instructions for Removal of the AFS ECU See: Lighting and Horns/Headlamp/Headlamp Alignment Control
Module/Service and Repair/Removal.
6. REMOVE POWER STEERING ECU ASSEMBLY
(a) Disconnect the 3 connectors from the power steering ECU assembly.
(b) Disconnect the connector from the power steering ECU assembly.
HINT
Pull out the lock of the lock lever, disengage the claw, and raise the lock lever to disconnect the connector as shown in the illustration.
(c) Remove the 2 nuts, clamp and power steering ECU assembly.
(d) Remove the relay block sub-assembly.