RX 350 FWD V6-3.5L (2GR-FE) (2010)
(f) Remove the rear lower coil spring insulator from the rear No. 2 suspension arm assembly.
(g) Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
NOTICE:
When removing the nut, keep the toe adjust cam from rotating.
8. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY (w/ Air Suspension)
(a) Remove the rear spring set plate from the rear No. 2 suspension arm assembly.
(b) Put matchmarks on the adjust cams and the rear suspension member sub-assembly.
Text in Illustration
(c) Remove the bolt (B) and nut.
NOTICE:
Since the stopper nut is used, loosen the bolt (B).
(d) Remove the nut (A), No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
NOTICE:
When removing the nut (A), keep the toe adjust cam from rotating.
9. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY (for 2WD)
(a) Support the rear suspension member with a jack using an attachment or an equivalent tool as shown in the illustration.