RX 350 FWD V6-3.5L (2GR-FE) (2010)
09830-01030
09830-01060
NOTICE:
Apply a small amount of grease to the threads and tip of SST (center bolt) before use.
HINT
Use SST with the "F" mark facing the rear suspension member front body mounting cushion.
(c) Using SST, install the rear suspension member front body mounting cushion (RH Side) until there is no clearance between the rear suspension
member sub-assembly and the rear suspension member front body mounting cushion (RH Side).
Text in Illustration
SST : 09527-17011
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
If the rear suspension member sub-assembly is scratched, apply paint to the scratched areas of the rear suspension member
sub-assembly.
(d) Remove SST from the rear suspension member sub-assembly.
4. INSTALL REAR SUSPENSION MEMBER REAR BODY MOUNT CUSHION LH
(a) Temporarily install the rear suspension member rear body mounting cushion LH while confirming the installation direction.
(b) Install SST as shown in the illustration.