RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
Torque : 80 Nm (816 kgf-cm, 59 ft-lbf)
NOTICE:
When installing the rear pneumatic cylinder assembly, first insert the positioning pin into the hole.
(c) Jack up the rear axle assembly to install the rear pneumatic cylinder assembly, placing a wooden block underneath to avoid damage.
Text in Illustration
(d) Temporarily install the rear pneumatic cylinder assembly to the body with the 3 bolts, and then fully tighten the 2 bolt (A).
Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)
(e) Using SST and a socket wrench, fully tighten the bolt (B).
Text in Illustration
SST : 09961-00950
without SST - Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)
with SST - Torque : 35 Nm (355 kgf-cm, 26 ft-lbf)