RX 350 FWD V6-3.5L (2GR-FE) (2010)
Thread diameter: 12.0 mm (0.472 in.)
Thread pitch: 1.5 mm (0.0591 in.)
NOTICE:
Install the nuts to prevent damage to the rear axle hub bolts.
(b) Using SST and a brass bar or an equivalent tool to hold the rear axle hub and bearing assembly, remove the rear axle hub bolt.
SST : 09628-10011
NOTICE:
Do not damage the threads of the rear axle hub bolts.
7. INSTALL REAR AXLE HUB BOLT
(a) Temporarily install a new rear axle hub bolt to the rear axle hub and bearing assembly.
Text in Illustration
(b) Install a washer and nut to the new rear axle hub bolt as shown in the illustration.
Recommended service nut:
Thread diameter: 12.0 mm (0.472 in.)
Thread pitch: 1.5 mm (0.0591 in.)
HINT
The thickness of the washer is preferably 5 mm (0.197 in.) or more.
(c) Using a brass bar or an equivalent tool to hold the rear axle hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
NOTICE:
*
Install the nuts to prevent damage to the rear axle hub bolts.
*
Do not damage the threads of the rear axle hub bolts.
(d) Remove the 3 nuts and washer from the 3 rear axle hub bolts.
8. INSTALL PARKING BRAKE SHOE ADJUSTING HOLE PLUG See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake/Installation
9. INSTALL REAR DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Rear
Brake/Installation
10. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY See: Brakes and Traction Control/Parking Brake System/Service and
Repair/Overhaul/Reassembly
11. ADJUST PARKING BRAKE SHOE CLEARANCE AND PARKING BRAKE PEDAL TRAVEL See: Brakes and Traction Control/Parking
Brake System/Adjustments
12. INSTALL REAR WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)