RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
*
If ATF comes out after removing the overflow plug, wait until the fluid flow slows and only drips come out.
*
If ATF comes out, it is not necessary to perform the initial filling procedure. After checking the tightening torque of the No. 1
transmission oil filler tube, temporarily tighten the overflow plug.
(c) Using a 6 mm hexagon socket wrench, check that the No. 1 transmission oil filler tube is tightened to the specified torque.
Text in Illustration
Torque : 1.7 Nm (17 kgf-cm, 15 in-lbf)
NOTICE:
If the No. 1 transmission oil filler tube is not tightened to the specified torque, the amount of fluid cannot be precisely adjusted.
HINT
To check the torque of the No. 1 transmission oil filler tube, insert the socket hexagon wrench into the overflow plug hole.
(d) Perform initial filling.
(1) Fill the transaxle through the refill hole until fluid begins to trickle out of the overflow plug hole.