RX 350 FWD V6-3.5L (2GR-FE) (2010)
Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)
(g) Temporarily install the gasket and the refill plug to the automatic transaxle.
5. REMOVE FRONT AXLE SHAFT NUT See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Drive Shaft
Assembly/Removal
6. SEPARATE FRONT STABILIZER LINK ASSEMBLY See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service
and Repair/Removal and Replacement/Front Shock Absorber/Removal
7. SEPARATE FRONT SPEED SENSOR See: Steering and Suspension/Suspension/Ball Joint/Service and Repair/Removal
8. SEPARATE TIE ROD ASSEMBLY See: Steering and Suspension/Steering/Steering Gear/Service and Repair/Removal and
Replacement/Removal
9. SEPARATE NO. 1 FRONT SUSPENSION LOWER ARM See: Steering and Suspension/Suspension/Ball Joint/Service and Repair/Removal
10. SEPARATE FRONT DRIVE SHAFT ASSEMBLY See: Steering and Suspension/Suspension/Ball Joint/Service and Repair/Removal
11. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front
Drive Shaft Assembly/Removal
12. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front
Drive Shaft Assembly/Removal
13. REMOVE TRANSAXLE CASE OIL SEAL
(a) Using SST, tap out the transaxle case oil seal.
SST : 09308-00010
14. REMOVE FRONT TRANSAXLE CASE OIL SEAL
(a) Using SST, tap out the front transaxle case oil seal.