RX 350 FWD V6-3.5L (2GR-FE) (2010)
(l) Install the shift lever assembly with the 4 nuts.
Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)
(m)Connect the 3 clamps to the shift lever assembly.
(n) Connect the 2 connectors.
(o) Push the lock piece into the adjuster case.
NOTICE:
*
Check that the park/neutral position switch and the shift lever are in neutral.
*
Securely push in the lock piece until the slider lock is engaged.
(p) After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the position again.
(q) Install the console box See: Shifter A/T/Service and Repair/Removal and Replacement/U660E Automatic Transaxle/Installation.