RX 350 FWD V6-3.5L (2GR-FE) (2010)
Shifter A/T: Testing and Inspection
U660E Automatic Transaxle
Inspection
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSPECTION
1. INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY
(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
HINT
Do not disconnect the shift lock control unit assembly connector.
(b) If the result is not as specified, replace the shift lock control unit assembly.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration