RX 350 FWD V6-3.5L (2GR-FE) (2010)
7. REMOVE SPEED SENSOR
(a) Disconnect the connector.
(b) Remove the 2 bolts and speed sensor from the valve body.
Up to 08/2009
U660F AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION
1. INSTALL SPEED SENSOR
(a) Coat the 2 bolts with ATF.
(b) Install the speed sensor to the valve body with the 2 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
(c) Connect the connector.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/U660F Automatic
Transaxle/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/U660F Automatic
Transaxle/Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/U660F
Automatic Transaxle/Installation
5. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY See: Service and Repair/Removal and Replacement/U660F Automatic
Transaxle/Transaxle Assembly/Installation
6. INSTALL TRANSFER ASSEMBLY
7. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY