RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Remove the 11 bolts and valve body from the transaxle.
NOTICE:
When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle
case to interfere with each other.
6. REMOVE MANUAL VALVE
(a) Remove the manual valve from the valve body.
Up to 08/2009
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION
1. INSTALL MANUAL VALVE
(a) Coat the manual valve with ATF and install it to the valve body.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
(a) Coat the O-ring of the transmission wire with ATF.
(b) Confirm that the manual valve lever is positioned as shown in the illustration and install the valve body assembly to the transaxle case with the
11 bolts.