RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Ensure that the O-ring is not twisted or pinched.
(b) Install the oil strainer to the valve body with the 2 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
(a) Install the 2 magnets to the oil pan.
Text in Illustration
(b) Install a new gasket to the oil pan.
(c) Apply adhesive to the 18 bolts.
Adhesive:
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
(d) Install the oil pan to the automatic transaxle with the 18 bolts.
Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)
NOTICE:
*
In order to ensure proper sealing of the transmission oil pan bolts, apply adhesive to the bolts and install them within 10 minutes
of adhesive application.
*
Completely remove any oil or grease from the contact surface of the transaxle case and oil pan sub-assembly with the gasket