RX 350 FWD V6-3.5L (2GR-FE) (2010)
Transaxle/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/U660E Automatic
Transaxle/Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/U660E
Automatic Transaxle/Installation
5. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY See: Service and Repair/Removal and Replacement/U660E Automatic
Transaxle/Transaxle Assembly/Installation
6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" See: Service and
Repair/Removal and Replacement/U660E Automatic Transaxle/Transaxle Assembly/Installation.
From 08/2009
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION
1. INSTALL TRANSMISSION WIRE
(a) Coat the O-ring with ATF.
(b) Coat the bolt with ATF.
(c) Install the transmission wire and lock plate to the valve body with the bolt.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
(d) Install the transmission wire to the clamp.
(e) Connect the 9 connectors.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/U660E Automatic
Transaxle/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/U660E Automatic
Transaxle/Installation