RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
17. REMOVE DIFFERENTIAL SUPPORT
(a) Remove the 3 bolts and differential support.
18. REMOVE UPPER REAR DIFFERENTIAL MOUNT STOPPER
(a) Remove the 2 upper rear differential mount stoppers from the No. 1 rear differential support.
19. REMOVE NO. 1 REAR DIFFERENTIAL SUPPORT
(a) Remove the 2 bolts, 2 nuts and No. 1 rear differential support.
HINT
The nuts have tabs to prevent them from rotating.
From 08/2009
AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY: REMOVAL
1. REMOVE REAR AXLE CARRIER SUB-ASSEMBLY LH
HINT
Refer to the procedure up to Remove Rear Axle Carrier Sub-assembly See: Steering and Suspension/Suspension/Rear
Knuckle/Service and Repair/Removal.
2. DRAIN DIFFERENTIAL OIL
(a) Using a hexagon wrench (10 mm), remove the differential inspection plug and gasket.
(b) Using a hexagon wrench (10 mm), remove the rear differential drain plug and gasket to drain the differential oil.