RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Using a chisel and a hammer, stake the rear drive pinion nut as shown in the illustration.
31. INSTALL DIAPHRAGM OIL SEAL
(a) Using SST and a press, install a new diaphragm oil seal into the rear differential carrier assembly.
Text in Illustration
SST : 09506-35010
SST : 09554-22010
NOTICE:
*
Install the diaphragm oil seal uniformly.
*
Press fit the diaphragm oil seal straight.
Distance (A):
0.7 to 1.3 mm (0.0276 to 0.0512 in.)
(b) Apply a light coat of MP grease to the lip of the new diaphragm oil seal.
32. INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL (for LH Side)
(a) Using SST and a press, install a new rear differential side gear shaft oil seal into the differential side bearing retainer.
Text in Illustration
SST : 09223-46011
SST : 09631-32020
NOTICE:
*
Install the rear differential side gear shaft oil seal uniformly.
*
Press fit the rear differential side gear shaft oil seal straight.