RX 350 FWD V6-3.5L (2GR-FE) (2010)
Drive/Propeller Shaft: Service Precautions
DRIVE SHAFT / PROPELLER SHAFT: DRIVE SHAFT SYSTEM: PRECAUTION
1. NOTICE OF REMOVING AND INSTALLING FRONT DRIVE SHAFT ASSEMBLY RH
(a) When removing and installing the front drive shaft assembly RH in an AWD vehicle, be sure to first drain all the transaxle oil and transfer oil.
If removal and installation are carried out without draining these oils, the transfer oil will flow into the transaxle side. Extensive cleaning will
be required if the two oils mix.