RX 350 FWD V6-3.5L (2GR-FE) (2010)
Heated Glass Element Switch: Service and Repair
Installation
Up to 08/2009
WINDOW / GLASS: WINDSHIELD DEICER SWITCH: INSTALLATION
1. INSTALL FRONT WIPER DEICER SWITCH
(a) Engage the 2 claws and install the front wiper deicer as shown in the illustration.
2. INSTALL NO. 1 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
3. INSTALL INSTRUMENT PANEL GARNISH LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General Diagnostics/Air Suspension System/Test Mode
Procedure
From 08/2009
WINDOW / GLASS: WINDSHIELD DEICER SWITCH: INSTALLATION
1. INSTALL FRONT WIPER DEICER SWITCH
(a) Engage the 2 claws and install the front wiper deicer as shown in the illustration.
2. INSTALL NO. 1 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
3. INSTALL INSTRUMENT PANEL GARNISH LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General Diagnostics/Air Suspension System/Test Mode