RX 350 FWD V6-3.5L (2GR-FE) (2010)
B. Determine if the Glass Breakage Sensor was installed at the Factory or as a Post Production Option (PPO)/Dealer Installed Option (DIO).
C. If Factory Installed follow the PPO/DIO Glass Breakage Sensor Accessory Installation Procedure in TIS to adjust GBS system sensitivity for
acoustic glass.
D. If PPO/DIO follow the PPO/DIO Glass Breakage Sensor Accessory Installation Procedure in TIS to adjust GBS system sensitivity and relocate
the GBS microphone for acoustic glass.
NOTE
System Sensitivity should be set to 9.
6. Confirm that noise has been reduced.
Technical Service Bulletin # SB0014-10R1
Date: 100209
Body - Front Door Window Wind Noise
L-SB-0014-10
Rev1
February 4, 2010
Wind Noise from Front Side Glass