RX 350 FWD V6-3.5L (2GR-FE) (2010)
HINT
Use the same procedure for the RH side and LH side.
25. REMOVE BACK WINDOW OUTSIDE MOULDING
(a) Using a scraper, remove the back window outside moulding.
NOTICE:
*
Be careful not to damage the windshield glass.
*
Be sure to replace the back window outside moulding with a new one.
26. CLEAN BACK DOOR GLASS
(a) Clean the outer edge of the back door glass with a non-residue solvent.
NOTICE:
*
Do not touch the back door glass surface after cleaning it.
*
Be careful not to damage the glass.
*
Even if using a new back door glass, clean the back door glass with a non-residue solvent.
27. CLEAN VEHICLE BODY
(a) Using a scraper, remove the moulding and adhesive from the back door glass.
Text in Illustration
(b) Clean and shape the contact surfaces of the vehicle body.
(1) Using a knife, cut away excess adhesive on the contact surfaces of the vehicle body, as shown in the illustration.
NOTICE:
Be careful not to damage the vehicle body.
HINT
Leave as much adhesive on the vehicle body as possible.
(2) Clean the contact surfaces of the vehicle body with a piece of cloth saturated with cleaner.
HINT