RX 350 FWD V6-3.5L (2GR-FE) (2010)
20. INSTALL DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
21. INSTALL REAR SEAT ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
22. CONNECT REAR SEAT LOCK CABLE ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
23. INSPECT REAR SEAT SLIDE ADJUSTER LOCK (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
24. INSTALL REAR SEAT TRACK BRACKET COVER LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
25. INSTALL REAR SEAT HEADREST ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
26. INSTALL REAR SEAT ASSEMBLY RH (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for RH Side)/Installation
27. CONNECT REAR SEAT LOCK CABLE ASSEMBLY (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
28. INSPECT REAR SEAT SLIDE ADJUSTER LOCK (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
29. INSTALL REAR SEAT TRACK BRACKET COVER RH (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
30. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
31. INSTALL REAR SEAT HEADREST ASSEMBLY RH (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
33. INSPECT SUSPENSION CONTROL SYSTEM (for RH Side)
(a) w/ Air Suspension:
(1) See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General Diagnostics/Air Suspension System/Test
Mode Procedure
34. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System
From 08/2009
WINDOW / GLASS: QUARTER WINDOW GLASS: INSTALLATION
1. CLEAN QUARTER WINDOW ASSEMBLY
(a) Clean the outer edges of the quarter window assembly with a non-residue solvent.