RX 350 FWD V6-3.5L (2GR-FE) (2010)
7. INSPECT FOR LEAK AND REPAIR
(a) After the adhesive has hardened, apply water from the outside of the vehicle. Check that no water leaks into the cabin.
(b) If water leaks into the cabin, allow the water to dry and add adhesive.
(c) Remove the protective tape.
8. INSTALL ROOF HEADLINING ASSEMBLY
(a) Return the front section of the roof headlining assembly to the original position.
9. INSTALL VISOR HOLDER (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
10. INSTALL VISOR HOLDER (for RH Side)
HINT
Use the same procedure for the RH side and LH side.
11. INSTALL VISOR ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
12. INSTALL VISOR BRACKET COVER (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Installation
13. INSTALL VISOR ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
14. INSTALL VISOR BRACKET COVER (for RH Side)
HINT
Use the same procedure for the RH side and LH side.
15. INSTALL ASSIST GRIP SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
16. INSTALL MAP LIGHT ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Console Lamp/Service and Repair/Personal
Light/Installation
17. INSTALL FRONT PILLAR GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
18. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
19. INSTALL FRONT PILLAR GARNISH RH
HINT
Use the same procedure for the RH side and LH side.
20. INSTALL INSTRUMENT SIDE PANEL RH
HINT
Use the same procedure for the RH side and LH side.