RX 350 FWD V6-3.5L (2GR-FE) (2010)
Headlamp Wiper Motor: Service and Repair
Removal
WIPER / WASHER: HEADLIGHT CLEANER MOTOR: REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
2. REMOVE ENGINE ROOM SIDE COVER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
4. REMOVE HOOD CENTER CUSHION See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal
5. REMOVE FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
6. DRAIN WASHER FLUID
(a) Loosen the clip and disconnect the headlight cleaner hose from headlight cleaner motor and pump assembly, and drain the washer fluid.
HINT
Use a container to collect the washer fluid.
7. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY
(a) Disconnect the connector and remove the headlight cleaner motor and pump assembly.