RX 350 FWD V6-3.5L (2GR-FE) (2010)
Headlamp Wiper Relay: Service and Repair
Removal
WIPER / WASHER: RELAY (w/ Headlight Cleaner System): REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
2. REMOVE ENGINE ROOM SIDE COVER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
4. REMOVE HOOD CENTER CUSHION See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal
5. REMOVE FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
6. REMOVE HEADLIGHT CLEANER CONTROL RELAY
(a) Disconnect the connector.
(b) Disengage the claw and remove the headlight cleaner control relay as shown in the illustration.