RX 350 FWD V6-3.5L (2GR-FE) (2010)
Windshield Washer Motor: Testing and Inspection
Washer Motor (for Front Side)
WIPER / WASHER: WASHER MOTOR (for Front Side): INSPECTION
1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
(a) Remove the washer jar.
(b) Disconnect the windshield washer motor and pump connector.
HINT
The check should be performed with the windshield washer motor and pump installed on the washer jar.
(c) Fill the washer jar with washer fluid.
(d) Connect a battery positive (+) lead to terminal 1 of the windshield washer motor and pump, and a negative (-) lead to terminal 2.