RX 350 FWD V6-3.5L (2GR-FE) (2010)
Wiper Blade: Service and Repair
Front Wiper Rubber
Components
WIPER / WASHER: FRONT WIPER RUBBER: COMPONENTS
Replacement
WIPER / WASHER: FRONT WIPER RUBBER: REPLACEMENT
1. REMOVE FRONT WIPER BLADE LH
(a) Remove the holder of the front wiper blade.
(b) Remove the front wiper blade from the front wiper arm as shown in the illustration.
NOTICE:
Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.
2. REMOVE FRONT WIPER BLADE RH
HINT
Use the same procedure for the RH side and LH side.
3. REMOVE WIPER RUBBER LH
(a) Remove the wiper rubber LH with the wiper rubber backing plates from the front wiper blade LH as shown in the illustration.