RX 350 FWD V6-3.5L (2GR-FE) (2010)
(1) Clean the wiper arm serrations.
Text in Illustration
(b) When reusing the windshield wiper link assembly:
(1) Clean the wiper pivot serrations with a wire brush.
(c) Install the front wiper arm and blade assembly LH with the nut to the position shown in the illustration.
Torque : 24 Nm (245 kgf-cm, 18 ft-lbf)
Text in Illustration
HINT
Hold the wiper arm by hand while tightening the nut.
(d) Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and there is no
interference with the vehicle body.
7. INSTALL FRONT WIPER ARM HEAD CAP
(a) Engage the 3 claws to install the front wiper arm head cap.
8. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
(a) Wipe off any tape adhesive residue with cleaner.