RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the 3 bolts and the rear wiper motor and bracket assembly.
From 08/2009
WIPER / WASHER: REAR WIPER MOTOR: REMOVAL
1. REMOVE UPPER BACK WINDOW PANEL TRIM See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
2. REMOVE REAR SPOILER SUB-ASSEMBLY See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Removal
3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
(a) Remove the nut and the rear wiper arm and blade assembly.
4. REMOVE REAR WIPER MOTOR GROMMET
(a) Remove the rear wiper motor grommet.
5. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the 3 bolts and the rear wiper motor and bracket assembly.
Up to 08/2009
WIPER / WASHER: REAR WIPER MOTOR: INSTALLATION
1. INSTALL REAR WIPER MOTOR AND BRACKET ASSEMBLY
(a) Install the rear wiper motor and bracket assembly with the 3 bolts.