RX 350 FWD V6-3.5L (2GR-FE) (2010)
(1) Clean the wiper pivot serrations with a wire brush.
Text in Illustration
(d) Install the rear wiper arm and blade assembly with the nut to the position shown in the illustration.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
Standard Clearance
Text in Illustration
HINT
Hold the wiper arm by hand while tightening the nut.
(e) Operate the rear wiper while spraying washer fluid onto the back door glass. Make sure that the rear wiper functions properly and the wiper
does not come into contact with the vehicle body.
4. INSTALL REAR SPOILER SUB-ASSEMBLY See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Installation
5. INSTALL UPPER BACK WINDOW PANEL TRIM See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
From 08/2009
WIPER / WASHER: REAR WIPER MOTOR: INSTALLATION
1. INSTALL REAR WIPER MOTOR AND BRACKET ASSEMBLY
(a) Install the rear wiper motor and bracket assembly with the 3 bolts.